Bon dia!
This thread inspired me to go into a shop and take a look at the WCR models.
For whatever reason, I found the fit of the WCR 140 to be far superior to the WCR 120 but I don't understand why that would be the case. Other than the flex, buckle type and different powerstrap, I can't discern the differences of the boot. Subjectively, the WCR 140 provided a snugger fit compared to the WCR 120 in the same size. The boots give me no indication as to their year of manufacture so maybe the models were different seasons.
However, when it came to cuff adjustment this is where I ran into trouble and maybe someone here can validate whether I and the 'shop tech' were correct RE the cuffs? I'm not sure based on the photos we took. I also couldn't find an online manual.
The picture shows the cuff positioning on one side of one boot, but the rest is explained below .
On the outside cuff (As in the photo) we set the cuff position to `+` (positive) - We think this would push the outside cuff UP?
On the inside cuff we set the cuff position to `-` (negative) To push the inside cuff DOWN
This was using the other cuff flange/nut (not sure what you call it) which had '2' written on it vs the 'n' on the one's we removed from the boot in it's stock form.
Most helpful if anyone can confirm it's correct. Cheers.
FINAL EDIT: 25/02/2024 - After re-reading this thread and looking at the post by jbotti which includes an online raptor manual I now have the answer I was looking for.