Head Tyrolia CP13 / SLR13 plate

Post your questions/comments about Gear here

Re: Head Tyrolia CP13 / SLR13 plate

Postby DougD » Thu Mar 24, 2016 2:48 am

My PRD-14s (2015-16) have ~4mm heel:toe delta. I've never felt any slop.

The PRX's had 7.5mm, which is too much for me.
DougD
 
Posts: 572
Joined: Thu Apr 10, 2014 6:22 am
Location: Connecticut, USA

Re: Head Tyrolia CP13 / SLR13 plate

Postby Max_501 » Thu Mar 02, 2017 7:47 am

chris719 wrote:PRD bindings 2014-2015 have 5.5mm of ramp while PRX are 7.5. For 2015-2016 PRD are 4.5mm but PRX has 9.5mm!


Anyone know the deltas for the 2016/17 PRD and PRX ?
User avatar
Max_501
 
Posts: 4124
Joined: Thu Mar 10, 2005 7:39 pm

Re: Head Tyrolia CP13 / SLR13 plate

Postby JMD » Thu Mar 02, 2017 1:01 pm

I just measured a new pair of 16/17 PRX Bindings on a set of Supershape Speeds. I found the delta to be 7.5mm. I do not have a pair of 16/17 PRDs to measure, but I have measured several sets of earlier PRDs and found a delta of 4.5mm on each of them. The delta listed for the PRD/PRXs has changed several times over the years in the Head/Tyrolia Manual. Every time I have measured the bindings over several years the delta has measured the same 4.5 PRD/7.5 PRX.
JMD
 
Posts: 85
Joined: Fri Jan 08, 2010 9:40 am

Re: Head Tyrolia CP13 / SLR13 plate

Postby chris719 » Thu Mar 02, 2017 3:15 pm

The Head OMS dealer page says 9.5 for 2016-2017 but it's possible it is incorrect. I have found it to be correct where the PDFs were not though. It's tricky to measure sometimes depending on how you do it too. Still 4.5 for PRD
chris719
 
Posts: 90
Joined: Mon Oct 18, 2010 12:55 am

Previous

Return to Gear

Who is online

Users browsing this forum: No registered users and 17 guests

cron